Description
This is the fox OEM eyelet bearing setup. This setup is extremely durable for most customers and disperses the shock load on the eyelet well compared to the aftermarket 3 piece kits . The pin will end up blowing out the UHMW bushing halves ruining the bushing . Normally the inner bearing and red seals is the only parts that are considered a wear component. This kit is to replace one eyelet end on a fox shock , 2 kits for 1 shock . Normally the upper bearings will outlive the lowers 2 to 1 . This setup is used on all brands , Polaris , Honda, Kawasaki, can am. Measure your OEM sleeve width to determine fitment with this part.
Polaris P/N in this kit
1501010 Bearing
1501014 Seal (red) x2
1501020 Pivot sleave
1501022 Side Spacers (black) x2
Sleeve Specs
30mm width
10mm bolt
fits rzr 900s, 900 trail , 1000s, general(fox), pioneer 1000, teryx,
Reviews
There are no reviews yet.